T-shaped clamp connection

Aluminum tubular busbar conductors are hollow-core conductors with a low skin-effect coefficient, which helps to raise the corona inception voltage. When used in outdoor switchgear, tubular conductors offer advantages such as a small footprint, a simple structure, and clear arrangement.

Category:

Aluminum Tube Bus

Product Description

　　Aluminum busbar

　　Tubular conductors are hollow-core conductors with a low skin-effect coefficient, which helps to increase the corona inception voltage. When used in outdoor switchgear, tubular conductors offer advantages such as a small footprint, a simple structure, and clear arrangement.

　　1. Implementation standard: YS/T454-2003 Aluminum and Aluminum Alloy Conductors

　　Product Grade: 3A2160636R051060

　　3 Product Status: H18T10T6T6511

　　4. Room-temperature physical and mechanical properties

　　5 Commonly Used Calculation Data for Aluminum Busbars

　　6. Current-carrying capacity of aluminum busbar (reference ambient temperature +25℃)

　　7. Deflection Calculation Data (taking 6063T6 as an example)

　　8 Installation and Usage Instructions

　　Tubular conductors are typically installed overhead after welding, using specialized busbar fittings for secure fixation. Since the strength of the joint area is reduced after welding—approximately 65% of the base material’s strength—it is essential to reinforce the interior of the joint with a liner pipe to prevent bending during operation once the conductor is installed overhead. The number of welded joints between two overhead support structures (or suspension points) should not exceed two. The commonly used welding methods for aluminum and aluminum alloy tubes are as follows:

　　Argon arc welding, or argon arc welding, is a welding process conducted under the protection of argon gas. It uses a DC power source and employs a welding wire (or electrode rod) as an electrode to generate an electric arc between the electrode and the workpiece. The welding is performed at the interface between the welding wire (or electrode rod) and the workpiece. This method offers several advantages: it concentrates heat effectively, maintains a stable arc, and ensures that the molten metal receives excellent protection from oxidation by the argon gas. Moreover, the argon arc can easily remove the oxide film from the surface of the molten metal. As a result, this process produces high-quality welds with few defects and high purity. Additionally, the technique is relatively easy to master, and it allows for welding in all positions.

　　1. Requirements for Argon Gas

　　The purity of argon must be maintained at 99.9% or higher, with impurities such as oxygen below 0.005%, hydrogen below 0.005%, moisture below 0.02 mg/L, and nitrogen below 0.015%. An increase in either oxygen or nitrogen will degrade the cathode atomization effect. When oxygen exceeds 0.3%, tungsten electrode burnout is exacerbated; when oxygen exceeds 0.1%, the weld surface becomes dull or turns black. When nitrogen exceeds 0.05%, the fluidity of the molten pool deteriorates, leading to poor weld bead formation.

　　2-connector type

　　Joint geometry and dimensions

　　3 Welding Requirements

　　To ensure the tubular conductor is securely fixed and to minimize deformation, the welding sequence should begin with spot welding to stabilize the main pipe and reduce bending at the joint. It is advisable to perform spot welding in a symmetrical pattern. The argon gas flow rate typically ranges from 30 to 50 L/min.

　　4 Welding Wire (or Electrode) Composition

　　5 Joint Strength Coefficient

None

Static contact connection

None

Static contact connection

dfdfgdfg

Hubei Bailian New Energy Technology Co., Ltd. Enterprise Code

Hubei Lianhua Power Busbar Manufacturing Co., Ltd. Enterprise Code